Bridge8 Transducer Amplifier Module
Low noise transducer amplifier in a modular system
- Wide range of fixed gains with independent variable gain adjustment
- Low pass filter
- Single ended or differential transducer compatibility
- Dual range output offset correction
- Independent module power switch
- Provides ± voltage excitation to transducers
Bridge8 is a modular, rack-mountable amplifier system. It is specifically designed for use as a signal conditioning amplifier with strain gages and other poered transducers. Bridge8 includes differential amplifiers featuring high input impedance, high common mode rejection and low current leakage input terminals for low noise operation. The Bridge8 also features a half bridge switch and channel offset. A wide variety of WPI transducers are available for force, temperature, pressure and light measurements. The Bridge8 amplifier is a clear choice for convenience and quality.
Any combination of ISO-DAM8 or Bridge8 modules may be combined in the same enclosure. The ISO-DAM8A module is also available in this rack configuration.
Stand alone amplifier for SI-KG optical force transducers!
- Designed for use with SI-H Muscle Tester Platforms
- Rapid Auto Zeroing function with fine offset adjustment
- Offset indicator LED’s
- Multiple gain ranges with adjustable fine tuning for precise calibration
- 1X, 2X, 5X, 10X gains. Optional factory setting allows for 10X, 20X, 50X and 100X gains
The SI-BAM21-LCB KG Optical Force Transducer Amplifier is used in conjunction with the muscle physiology systems. The SI-BAM21-LCB powers the force transducer and converts the output of the transducer to an amplified analog voltage that is proportional to the force applied to the force transducer. The output signal can be multiplied by a factor of 1, 2, 5 or 10 to provide better resolution for a minimal change in applied force.
NOTE: An optional factory setting increases the multiplier by a factor of 10, allowing the signal to be multiplied by 10, 20, 50 and 100.The SI-BAM21-LCB amplifier works with KG optical force transducers to:
- Generate an analog output (-10VDC to +10VDC) that is proportional to the force applied to the tissue sample.
- Supply a DC voltage that powers the SI-KG force transducer to which it is connected.
Optical Force Transducer Amplifier Module
Choose the amplifier modules you need to measure nearly anything!
- Designed for use with SI-H Muscle Tester Platforms
- Rapid Auto Zeroing function with fine offset adjustment
- Offset indicator LED’s
- Multiple gain ranges with adjustable fine tuning for precise calibration
- 1X, 2X, 5X, 10X gains. Optional factory setting allows for 10X, 20X, 50X and 100X gains
The SI-BAM21-LCB KG Optical Force Transducer Amplifier is used in conjunction with the muscle physiology systems. The SI-BAM21-LCBpowers the force transducer and converts the output of the transducer to an amplified analog voltage that is proportional to the force applied to the force transducer. The output signal can be multiplied by a factor of 1, 2, 5 or 10 to provide better resolution for a minimal change in applied force.
NOTE: An optional factory setting increases the multiplier by a factor of 10, allowing the signal to be multiplied by 10, 20, 50 and 100.
The SI-BAM21-LCB amplifier works with KG optical force transducers to:
- Generate an analog output (-10VDC to +10VDC) that is proportional to the force applied to the tissue sample.
- Supply a DC voltage that powers the SI-KG force transducer to which it is connected.
Amplify output voltage signals
- Use with many different types of resistive based transducers
- WPI resistive force transducers plug in directly
- Supports full resistive bridge or single ended operation
- Output offset control
- Four gain ranges from 1–1000 ×
- Provides “excitation” voltage for resistive bridge transducers
Transbridge (TBM4M) is a four-channel analog transducer manifold, specifically designed to amplify output voltage signals from pressure, force, displacement, and temperature transducers as well as a wide variety of other signal sources. Analog output signals are available from each channel for input to a data acquisition system for digital signal processing in a computer. Each channel contains a regulated 10 V power supply (+5 and -5 V with respect to signal ground) to provide DC power to transducers, and a precision differential amplifier with selectable voltage amplification and variable position adjustment control.
