Primary applications include intracellular recording and microiontophoresis.
- Machined from the highest quality acrylic, annealed and then vapor polished
- Capillary glass holders are bored for specific glass sizes (e.g. 1.0, 1.2, 1.5, and 2.0 mm)
- Holders are available for virtually any headstage
- Ag/AgCl Pellet and Ag Wire styles available
- Holders can include a port to apply pressure or suction
- Holdewrs can be vented to equalize internal pressure
Primary applications include: 1) Intracellular Recording and 2) Microiontophoresis
- Machined from the highest quality acrylic, annealed and then vapor polished
- Capillary glass holders are bored for specific glass sizes (e.g. 1.0, 1.2, 1.5, and 2.0 mm)
- Holders are available for virtually any headstage
- Ag/AgCl Pellet and Ag Wire styles available
- Holders can include a port to apply pressure or suction
- Holders can be vented to equalize internal pressure
E Series Electrode Holder with Handles
Primary applications include intracellular recording and microiontophoresis
- Machined from the highest quality acrylic, annealed and then vapor polished
- Capillary glass holders are bored for specific glass sizes (e.g. 1.0, 1.2, 1.5, and 2.0 mm)
- Holders include a 6.3 mm diameter by 6.3 cm long handle
- Holders are available for virtually any headstage
- Ag/AgCl Pellet and Ag Wire styles available
- Holders can include a port to apply pressure or suction
- Holders can be vented to equalize internal pressure
Primary applications include intracellular recording and microiontophoresis
- Machined from the highest quality acrylic, annealed and then vapor polished
- Capillary glass holders are bored for specific glass sizes (e.g. 1.0, 1.2, 1.5, and 2.0 mm)
- Holders are available for virtually any headstage
- Ag/AgCl Pellet and Ag Wire styles available
- Holders can include a port to apply pressure or suction
- Holders can be vented to equalize internal pressure
THP Series holders allow quick and easy coupling of theta tubing to a pressurized source. These kits allow microinjection using theta glass and include all needed supplies. The lightweight acrylic electrode holder assembly permits easy coupling to the pressure source, and the complete system is rated to 100 PSI.
- Allows microinjection using theta glass
- Kit includes everything needed
- Lightweight, acrylic electrode holder
- Easy coupling to pressure source
- Rated to 100 PSI
The ME SERIES holders are designed for applying pressure or suction to an electrode or pipette while also maintaining an electrical connection.
- Intracellular and Extracellular Recording
- Microinjection
- Microiontophoresis
- Holders with T port are compatible with Picospritzer® system made by General Valve
Replacement parts for Microelectrode holders
- Coupling Elements
- Pipette and Wire Seals
- Glass Seal Compression Caps
- Connector Pins and Jacks
The MP SERIES holders are designed for the non-electrical application of pressure or suction to a pipette.
- Used primarily for microinjection
- Various pressure port connections are available
- Holders with the T port designation are compatible with the Picospritzer® system made by General Valve
Microperfusion (perfusion at the pipette tip)*
These electrode holders are compatible with Axon’s patch clamps and microelectrode amplifiers made after February 1995.
- Made from polycarbonate for lower noise levels in patch clamp applications.
- Gold-plated connector pins, insulators made from Teflon® or polycarbonate.
- Holders attach directly to the headstage. Available with choice of straight (axial), right angle or 45° body.
These BNC style electrode holders are compatible with Heka, List, NPI and Dagan patch clamps.
- Fits all headstages having BNC style connectors
- Made from polycarbonate for lower noise levels in patch clamp applications.
- Gold-plated connector pins, connector insulators made from Teflon® or polycarbonate.
- Holders attach directly to the headstage, are available with choice of straight (axial), right angle or 45° body.
These electrode holders are compatible with Warner patch clamps built prior to
- Made from polycarbonate for lower noise levels in patch clamp applications.
- Gold-plated connector pins, connector insulators made from Teflon® or polycarbonate.
- Holders attach directly to the headstage, are available with choice of straight (axial), right angle or 45° body.
These electrode holders are compatible with Warner patch clamps and Axon patch clamp amplifiers built prior to February 1995.
- Made from polycarbonate for lower noise levels in patch clamp applications.
- Gold-plated connector pins, connector insulators made from Teflon® or polycarbonate.
- Holders attach directly to the headstage, are available with choice of straight (axial), right angle or 45° body.
Warner perfusion manifolds can be used in any application where from 2 to 8 perfusion lines are required to be connected to a chamber or other device.
- Manifold inputs converge to the common output with a minimum of dead space
- Designed for use with PE-160, PE-50, and PE-10 polyethylene tubing
- Can also be used with other tubings with similar dimensions
